Milwaukee 4270-20 Manuel de l'opérateur télécharger pdf (Page 10)

page 10

Safety Strap 4ft.

Cat. No. 48-58-0090

HAWG WASH® Cutting Fluid

Case of twelve-16oz. bottles, which makes one gallon of lubricant per

bottle.

Cat No. 49-32-0081

HAWG WASH® Hand Pump

Cat. No. 44-46-0090

1/2" Drill Chuck Adapter

Also includes chuck and chuck key.

Cat. No. 48-66-2125

Maintaining Tools

Keep your tool in good repair by adopting a regular maintenance pro-

gram. Before use, examine the general condition of your tool. Inspect

guards, switches, tool cord set and extension cord for damage. Check

for loose screws, misalignment, binding of moving parts, improper

mounting, broken parts and any other condition that may affect its safe

operation. If abnormal noise or vibration occurs, turn the tool off im-

mediately and have the problem corrected before further use. Do not

use a damaged tool. Tag damaged tools “DO NOT USE” until repaired

(see “Repairs”).

Under normal conditions, relubrication is not necessary until the motor

brushes need to be replaced. After six months to one year, depending on

use, return your tool to the nearest MILWAUKEE service facility for the

following:

• Lubrication

• Brush inspection and replacement

• Mechanical inspection and cleaning (gears, spindles, bearings,

housing, etc.)

• Electrical inspection (switch, cord, armature, etc.)

• Testing to assure proper mechanical and electrical operation

MAINTENANCE

Cleaning

Clean dust and debris from vents. Keep the tool handles clean, dry and

free of oil or grease. Use only mild soap and a damp cloth to clean your

tool since certain cleaning agents and solvents are harmful to plastics and

other insulated parts. Some of these include: gasoline, turpentine, lacquer

thinner, paint thinner, chlorinated cleaning solvents, ammonia and house-

hold detergents containing ammonia. Never use ﬂ ammable or combustible

solvents around tools.

Repairs

If your tool is damaged, return the entire tool to the nearest service cen-

ter.

WARNING!

To reduce the risk of injury, always unplug your tool before per-

forming any maintenance. Never disassemble the tool or try to do

any rewiring on the tool's electrical system. Contact a MILWAUKEE

service facility for ALL repairs.

WARNING!

To reduce the risk of injury, electric shock and damage to the tool,

never immerse your tool in liquid or allow a liquid to ﬂ ow inside

the tool.

ACCESSORIES

To reduce the risk of injury, always unplug the tool before attach-

ing or removing accessories. Use only speciﬁ cally recommended

accessories. Others may be hazardous.

WARNING!

FIVE YEAR TOOL LIMITED WARRANTY

For a complete listing of accessories refer to your MILWAUKEE Elec-

tric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a

catalog, contact your local distributor or a service center.

Every MILWAUKEE power tool (including cordless product – tool, battery pack(s)

and battery charger and Work Lights – cordless ﬂ ashlights) is warranted to the

original purchaser only to be free from defects in material and workmanship.

Subject to certain exceptions, MILWAUKEE will repair or replace any part on an

electric power tool which, after examination, is determined by MILWAUKEE to be

defective in material or workmanship for a period of ﬁ ve (5) years* after the date

of purchase. Return the electric power tool and a copy of proof of purchase to a

MILWAUKEE factory Service Center location or MILWAUKEE Authorized Service

Station, freight prepaid and insured. This warranty does not apply to damage that

MILWAUKEE determines to be from repairs made or attempted by anyone other

than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear

and tear, lack of maintenance, or accidents.

*Every MILWAUKEE V™-technology (V18™ & V28™) LITHIUM-ION Battery Pack

and M18 XC LITHIUM-ION Battery Pack is warranted for ﬁ ve (5) years / 2000

charges from the date of purchase, whichever ﬁ rst occurs. The ﬁ rst 1000 charges or

2 years of the warranty, whichever ﬁ rst occurs, are covered through free replacement

of the defective battery. This means that for the earlier of the ﬁ rst 1000 charges or

two (2) years from the date of purchase/ﬁ rst charge, a replacement battery will be

provided to the customer for any defective battery free of charge. Thereafter, the

remaining charges up to a total of 2000 or the remainder of the ﬁ ve (5) year period

from the date of purchase, whichever ﬁ rst occurs, will be covered on a pro rata

basis. This means that every customer gets an additional 1000 charges or three

(3) years of pro rata warranty on the V™-technology LITHIUM-ION Battery Pack

and M18 XC LITHIUM-ION Battery Pack depending upon the amount of use.

*The warranty period for ALL other LITHIUM-ION Battery Packs is two (2) years

from the date of purchase.

*The warranty period for M12 2-Beam Laser & M12 Power Port, Ni-CD Battery

Packs, Job Site Radios, and Trade Titan™ Industrial Work Carts is one (1) year

from the date of purchase.

Warranty Registration is not necessary to obtain the applicable warranty on a

MILWAUKEE product. The manufacturing date of the product will be used to

determine the warranty period if no proof of purchase is provided at the time war-

ranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES

DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PUR-

CHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS

CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT

SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSE-

QUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES,

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF

ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING,

BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY

IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS,

WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE

GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE

OR PURPOSE, AND ALL OTHER WARRANTIES.

This warranty applies to product sold in the U.S.A., Canada and Mexico only.

Please consult the ‘Service Center Search’ in the Parts & Service section of

MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST

(1.800.729.3878) to locate your nearest service facility for warranty and non-

warranty service on a Milwaukee electric power tool.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Milwaukee 4270-20 Manuel de l'opérateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Milwaukee 4270-20